Discover our Clipsal Smart Home packages as seen on the Block

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How to change the Reactive Power and Energy calculation for the PM8000 series meters

    In order to meet 62053-24, the reactive power (kVAR) is calculated from the fundamental frequency. The meter has the option to change the calculations to use the full spectrum up to the 63 rd harmonic by changing an External Boolean.


    ION Setup

    In the PM8000 there is an External Boolean "UseFundkVAR", this register can be changed to alter how the meter calculates kVAR values including energy. By default, this register is true. A description of the behaviour of the meter based on this register is outlined below:
    If UseFundkVAR is true, all reactive power and energy calculations  are based on the fundamental frequency.
    If UseFundkVAR is false, all reactive power and energy calculations are based on full spectrum up to 63 rd harmonic.

    Using ION Setup
    1) Connect to the meter
    2) Place the meter in advanced edit mode
    3) Open the "Ext Bool Modules"
    4) Open the module "UseFundkVAR"
    5) Select output registers tab
    6) Hold down shift and left click 'UseFundkVAR"
    7) In the pop up window, select the desired state of the output, either ON or OFF.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance