Discover our Clipsal Smart Home packages as seen on the Block

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    PowerLogic High Density Metering System 1-Meter Enclosure meter not energizing

    Meter does not power on after installation.

    Product Line

    HDM installation

    Installation appears to be complete. However additional work may need to be done.

    *Warning:  Installation and maintenance of this device should only be performed by qualified, competent personnel that have appropriate training and experience with high voltage and current devices. Failure to follow the instructions / warnings in the Meter Installation Guide can result in permanent damage to the meter, severe injury or death.

    With the CPT option, a load line to power the CPT needs to be move to the appropriate voltage line to step down the voltage for the meter to energize.
    The available voltages for the primary side of the PT are:

    The line is in position 1 before install.
    During install this needs to be moved to position 2 (208V), 3 (480V), or 4 (600V) depending on the system's voltage.
    See the image below. The red box indicates the load line to the CPT.

    For reference view the PowerLogic High Density Metering System 1-Meter Enclosure Installation Guide

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance