Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Summary of M340 Remote I/O PRA module rotary switch for Valid IP Address Settings

    Summary of M340 PRA rotary switch for Valid IP Address Settings
    Each rotary switch position that you can use to set a valid IP address is marked on the module.
    The following information summarizes the valid address settings::
    • Device name: For a switch-set device name, select a numeric value from 00 to 159. You can use both switches:
    • On the upper switch (Tens digit), the available settings are 0 to 15.
    • On the lower switch (Ones digit), the available settings are 0 to 9.
    • The selection on the lower switch of any non-numeric (BOOTP, STORED, CLEAR IP,DISABLED) makes the setting on the upper switch inconsequential.
    • BOOTP: To get an IP address from a BOOTP server, select either of the two BOOTP positions on the bottom switch.
    • STORED: The device uses the application’s configured (stored) parameters.
    • CLEAR IP: The device uses the default IP parameters.
    • DISABLED: The device does not respond to communications.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance