in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How to recover C-Bus, C-Touch Spectrum & Black and White MKII?

    If your C-Touch Spectrum or Black & White MKII has had the reset button pressed or needs to be recovered after a file corruption runs through the following steps.
    1. Remove the fascia from the touch screen
    2. below the blue LED you will see a round hole which leads to the reset button or this might be covered with a yellow or black label.
    IMPORTANT: When this reset button is pressed it will erase the Firmware and the Project files from the unit

           3. To reset the unit you would typically press this button for a few seconds
           4. Once pressed the unit will reboot to show a black screen ONLY but will show the blue LED being ON

    To now recover the unit, download and install the PICED software from http://www2.clipsal.com/cis/technical/downloads

    - Create a new blank project based on either the Black and White or Spectrum MKII's
    - On the main toolbar in PICED click on Transfer
    - Now select - Recover C-Touch 2 or Spectrum
    - This will open a window where you can select the current firmware typically located here: C:\Clipsal\PICED\Firmware
    - After you have selected the *.mot file it may prompt to select the correct Com Port otherwise it will now transfer the firmware.
    - Once completed and after the unit has rebooted, it should now say this unit need's programing before first use.
    - You can now transfer the project to the unit.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance