Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How does the jog function work when the drive is configured for 3 wire control?

    Issue:
    jog function in 3 wire control

    Product Line:
    Altivar 61/71

    Environment:
    All models and serial numbers

    Cause:
    None

    Resolution:
    The drive can operate the jog function in 3 wire control with the following characteristics. 
    To jog in 3 wire control, the jog function must be enabled and then the start command (LI2) must be activated.
    To stop the motor while in jog function simply remove the jog enable.  The stop enable (LI1) does not need to be deactivated as removing the jog function will perform this function.  The drive will stop running the motor and return the drive to normal 3 wire control.
    If the drive is running the motor and the jog function is then enabled the drive will stop the motor and wait for the start command (LI2).   

     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance