Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What type of fiber optic cable is recommended for the M340 or M580 BMXNRP0200 fiber optic repeater?

    Title
    BMXNRP0200 fiber optic cable
     
    Issue
    BMXNRP0200 fiber optic cable
     
    Product Line
    M580 M340, BMXNRP0200
     
    Environment
    Unity Pro
     
    Cause
    N/A
     
    Resolution
     Below are the parameters specified for the Fiber Optic cable:
    •  the wavelength of the optical signal: 1310 nm
    •  the cable index: use graded-index cable only
    •  Fiber size - 50/125 μm or 62.5/125 μm or  9/125 μm
    For most multimode optical cable links, the use of 62.5/125 μm cable is recommended because of its relatively low loss and signal distortion. Select the fiber optic cable that meets the demands of your application. Multi-conductor cables are recommended. Most 62.5/125 μm cables are rated at 1.5 dB loss per km. With a multi-conductor cable, pairs come with an attenuation specification as measured, which is less than 3.5 dB/km.
    The fiber ports, in both multi-mode and single-mode modules, use LC-type connectors.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance