Discover our Clipsal Smart Home packages as seen on the Block

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Cannot View diagrams in engineering client after running EPSS Generator tool

    Diagrams created from EPSS generator tool will not open in engineering client , Diagrams open fine in Vista on from the server.

    Product Line
    PMEHC 7.22
    PMEDC 7.22
    PME 8, 8.1, 8.2

    StruxureWare Power Monitoring Expert Vista Application

    EPSS Generator tool does not bring the network  path over for the diagrams.  Right clicking on the link in vista will show the local server path for the diagrams "C:\Program files(X86)\Schneider Electric\Power Monitoring Expert\config\diagrams\ud\EPSS\diagram.dmg "


    1. In Vista engineering client click "File > Open" you will see the server path to the diagrams you can copy this or note it.

    2. Right click on the link  in the engineering client and then select the action tab in the path field.

    3. Remove the local path EG: "C:\Program files(X86)\Schneider Electric\Power Monitoring Expert\config\diagrams\ud\EPSS\diagram.dmg "  keeping the diagram name and past the server path you copied,  it will now look something like this:

    4. You will need to do this for each link created by the generator tool.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance