Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    what are the OIDs for reading the LED status from Connexium Ethernet Switch TCSESM083F23F1 using SNMP Protocol in a MIB browser.

    The very first step is to install the correct MIB file in the MIB Browser.
    We need to install the two files in the MIB Browser.
    Contact your local country Schneider Electric Customer Care Center to get this files.

    The LED status can for Power, Ring Manager, Standby, fault , Relay R1 and R2.
    The OID for them are as below.

    1. Power Supply P >> oid=".
    2. Fault >>  oid=".
    3. Ring Manager RM  >> oid="."
    4. Standby >> oid="."
    5. Relay R1 >> oid="."
    5. Relay R2 >> oid="."


    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance