Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Does Schneider Electric offer a replacement for the Berger Lahr WPM-311 controller?

    The entire product line of WPM-311 type controllers from Berger Lahr are obsolete and no longer available
    Schneider Electric does not offer a drop in replacement.

    The Berger Lahr WPM311 uses a special programming environment which was unique to Berger Lahr ( Depending on the firmware, Bpro3 programming system or ProOed3 Programming system )

    The WPM311 is a 4 axis motion controller that utilizes pulse/direction type outputs which were most commonly used to interface with stepping motor drives.

    So to replace the WPM311 you will have to not only find a controller that is capable of controlling multiple axis, but you will also have to write a motion program that duplicates the current application process.

    You may try contacting the OEM machine builder, they may have spare WPM311 controllers or they may have already developed a retrofit solution.  

    Service is still available at the Schneider Electric Repair Center in Greensboro NC

    rev 2-20-18

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance