Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What would cause the ATS48 HMI to randomly and continuously cycle or scroll through menu selections?

    Issue:
    What would cause the ATS48 HMI to randomly and continuously cycle or scroll through menu selections? 

    Product Line:
    ATS48

    Environment:
    All

    Cause:
    HMI display is unstable

    Resolution:
    The HMI (keypad) could be scrolling, or the Soft Starter's display could be scrolling. Or they could BOTH be scrolling. 
    This typically indicates a problem with the control circuitry or keypad button.
    Unplug the cable from the Soft Starter's Modbus port and power-cycle. If the display on the Soft Starter is now functioning properly, the keypad (VW3G48101) and/or cable need to be replaced. 

    If the integral display continues scrolling (after the cable is unplugged from the Modbus port and you've power-cycled the ATS48), replace the control board, part number VX4G481.
     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance