Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How to install and configure Microsoft Loopback adapter in a Windows Server 2008

    Issue
    To ensure ION Site Service continue to operate properly if the network connection to the server is interrupted, it may be necessary to install and configure Microsoft Loopback adapter. 


    Product Line
    Power Monitoring Expert 7.2.x
    Power Monitoring Expert 8.x
    Power Monitoring Expert 9.x

    Environment
    Device manager

    Cause
    To ensure ION Site Service continue to operate properly if the network connection to the server is interrupted, it may be necessary to install and configure Microsoft Loopback adapter. 

    Resolution
    To install the Loopback adapter in Windows 7, Server 2008 or Server 2012:
    1. Click Start, then type cmd in the search box.
    2. When cmd.exe appears, right-click it and choose Run as administrator.
    3. In the command prompt, type hdwwiz.exe and press Enter.
    4. Click Next.
    5. Select Install the hardware that I manually select from a list (Advanced), then click Next.
    6. Select Network adapters, then click Next.
    7. Select Microsoft as the manufacturer, select Microsoft Loopback Adapter as the adapter, then click Next.
    8. Select Next to confirm the installation.
    9. Select Finish to complete the installation.
    To configure the newly created adapter:
    1. Click Start > Control Panel > Network Connections.
    2. Select the newly created connection (named Local Area Connection #, where # is its order number).
    3. Right-click on the selected connection and choose Properties from the menu.
    4. Confirm that Microsoft Loopback Adapter or Microsoft Loopback Adapter # is displayed in the Connect Using: field. 

       
    5. Deselect everything except Internet Protocol (TCP/IP).
    1. Select Internet Protocol (TCP/IP), and click Properties to open Internet Protocol (TCP/IP) Properties.
    2. Select Use the following IP address. Fill in the IP address and Subnet mask fields. 

      Example: 10.10.10.10, 255.255.255.0 
       
    3. Click Advanced to open Advanced TCP/IP Settings.
    4. Switch to WINS and select Disable NetBIOS over TCP/IP.
    5. Click OK to close Advanced TCP/IP Settings.
    6. Click OK to close the Internet Protocol (TCP/IP) Properties.
    7. Click OK to close the connection properties.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance