Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What is fault code CLF on an ATS48?

    ATS48 displays code CLF

    Product Line:
    Altistart 48

    All models

    CLF error in the display.

    The ATS48 monitors the control power on CL1/CL2.  If the voltage experiences a sag below 44Vac for more than 200msec, but returns quickly enough for the internal power supply to ride through, then the ATS48 will fault CLF.

    Verify the presence and stability of power on CL1/CL2.

    ATS48 internal causes may include:
    Control terminal not seated properly
    Wiring from control board to power board J4 plug
    Defective/failed power board

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance