in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    ATV212 or ATV21 - How do you set up the drive to run multiple motors

    Setting up ATV212 or ATV21 to run multiple motors

    Product Line:
     ALL ATV212 drives
    ALL ATV21 drives


     The drive needs to be sized for the combined FLA of all motors.  There needs to be external overload protection for each motor, and the overloads need to be wired so that if any of them trip, the drive will be shut down. 
    In the drive, set the drive current parameters to the combined FLA of both motors.  Turn off the Output Phase Loss ( F605).
    All motors must start and stop together and will run at the same speed.
    It is not acceptable to start or stop a single motor while the drive is controlling other motors.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance