Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How can I verify that the analog output of the ATV61 or ATV71 drive is correct?

    Issue:
    How can I verify that the analog output of the ATV61 or ATV71 drive is correct?

    Product Line:
    ATV61, ATV71

    Environment:
    All models and serial numbers

    Cause:
    None

    Resolution:
    1.  Set the Maximum Frequency parameter (tFr) to 60.
    2.  Set the "AO1 type" to current and "AO1 min output" to 4. 
    3.  If a wire is connected to AO1 then remove it..  
    4.  Connect your mA current meter in series between AO1 and COM. 
    5.  The value should approximate the "AO1 min output" from step 2.
    Note: The analog output can also be seen by looking at the "Analog Outputs Image" in the monitoring menu under logic input map.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance