Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Why M238 plc not in RUN after power off/on ?

    If you do not have external battery or external battery is depleted, sio only internal battery is in M238. You need to let in charge at least 22h before doing a power off. The full chardged internal battery can support a poweroff of the PLC only 3 days duration without losinf any datas. With more than 3 days without power (and without external battery), the PLC will stay in STOP at the next powerON because the internal state of the PLC( Stop or RUNNING) is included into the "few system internal variables" saved into the 'RAM saved area' during PowerOff procedure.
    Recommandations: 1)Use the external battery or; 2) Configure the External input as STOP/RUN input; 3) Change the Starting mode options in SoMachine software to "Start in Run".

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance