Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Cannot change the IP address of PM5000 meter with Ethernet

    Issue
    Unable to change the IP address on PM5000 meter with Ethernet, or communications are lost after changing the IP address.

    Product Line
    PM5320
    PM5340
    PM5560
    PM5563

    Environment
    Energy meters
    Power meters

    Cause
    After configuring the IP address and verifying it was saved, the IP address displayed is not what was entered previously. This issue may also appear after experiencing a communication loss.

    Resolution
    *Warning:  Installation and maintenance of this device should only be performed by qualified, competent personnel that have appropriate training and experience with high voltage and current devices. Failure to follow the instructions / warnings in the Meter Installation Guide can result in permanent damage to the meter, severe injury or death.

    Some PM5000 meters were shipped with a firmware that does not cycle the power after saving the IP address. After configuring the desired IP address, save the configuration changes by exiting the Ethernet information screen and then manually power cycle the meter. The meter will not display the correct IP address until it has completed a reboot cycle. 

    Note: After applying the IP address, do not go back to verify the changes. Instead, immediately power cycle the device and then verify that the configuration held.

    Schneider Electric released firmware to update the functionality of this device. Instructions and link to download Firmware for this device is available at FA299853.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance