Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Why SoMachine application need to do Create boot application operation after online change every time?

    SoMachine PLC application is stored in Flash. When PLC is powered on, the application will be copied from Flash to RAM, and run in RAM. If you do online change, the change is just stored in RAM. So you need to do Create boot application operation to store the change in Flash. Otherwise, the change will lost when you power off PLC.

    You can change the application setting with: Create implicit boot application on Online change. Please see attached picture

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance