Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How do you calculate the size of the enclosure required for the ATS48’s to dissipate the heat generated

      To calculate the size of the enclosure required for an ATS48 soft start you would use the follow equations
               To calculate the figure P use the power dissipated figures from the below tables and add it to the power
           dissipated figures of all the other equipment to be housed in the enclosure          
            For Standard Applications                                For Severe Applications
             You then insert the number calculated for Rth into the calculation below; the Effective exchange 
         surfaces are those that do not make contact with any other object i.e. floor or wall

              It is always advisable to fit a bypass contactor with the ATS48 Soft Starter to     
                                          reduce the heat generated

                  The last two items show the recommended spacing’s around the soft starters and the flow rate of the
            fans if fitted into the cabinet



    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance