Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Difference between older D2 LC1D contactors and newer LC1D contactors

    Issue:
    What is the difference between the older D2 style contactors where aux contacts had to be specified and the newer LC1D contactors?

    Product Line:
    TeSysD contactors

    Environment:
    US product

    Cause:
    Crossing into new units from old units require a review of differences

    Resolution:
    The older D2 style contactors required a specification of needed auxiliary contacts.  For example:

    LC1D2501G6 would be an LC1D25 with 1 NC contact
    LC1D2510G6 would be an LC1D25 with 1 NO contact

    The newer contactors automatically come with 1 NO and 1 NC auxiliary contact.  For example:
    LC1D25G7 has 1 NO and 1 NC contact

    The older contactors usually had a dedicated 60hz coil.  This is designated by the 6 at the end of the part number.  The newer contactors have coils designed for 50/60hz and are signified by the 7 at the end of the part number.
     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance