Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Are the XCSDMCx7 coded magnetic switches with contact and LED compatible with the XPSAK or XPSAR Preventa modules?

    No, the XCSDMCx7 coded magnetic switches are not compatible, however other Preventa Safety modules are as detailed below:

    Coded magnetic switches:

    • XCSDMC7 
    • XCSDMP7
    • XCSDMR7
    are characterised by the resistance across their terminals, which differs according to whether their contact has an LED or not: Contact with 1 LED: 57 ohms
    Contact without LED: 10 ohms 

    With regard to Preventa safety modules, the maximum wiring resistance RL between modules and magnetic switches must be higher than that of the magnetic switch contacts:

    • XPSDMBxx and XPSDMExxxx: 100 ohms => suitable for contacts with or without LED
    • XPSAFxxxx: 90 ohms => suitable for contacts with or without LED
    • XPSAKxxxx: 28 ohms => only suitable for contacts without LED
    • XPSARxxxx: 50 ohms => only suitable for contacts without LED 

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance