Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    LUA1C vs LUFN What's the difference and how many blocks can we add in to the Tesys U line base?

    Issue:  What is the difference between the LUA1C and LUFN contact blocks? And how many can be used in the tesys U starter?

    Product Line:
    All Schneider Electric products

    Products sold and used in the United States

    Cause: Selecting auxiliary contact modules for the tesys u motor starter line.

    Resolution: The LUA1C modules will have aready condition contact and a fault condition contact, while the LUFN has contacts that are both pole state contacts. For example the LUA1C20 has a ready condition and a fault condition contact; one contact is closed in ready and run, the other one is open in off ready and run but closed in short circuit trip or overload trip. The LUFN20 are both pole state contacts; if the coil is powered and the poles are closed these contacts are closed. There is a table (18.115) on page 18-28 of the digest 176 to illustrate this.


    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance