in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How to program an ATV18 drive for 2 wire control and low speed as speed reference?

    Issue:
    How to program an ATV18 drive for 2 wire control and low speed as speed reference?

    Product Line:
    ATV18, Altivar 18.

    Environment:
    All.

    Cause:
    Programming and setup.

    Resolution:
    2 wire control for ATV18 drive will be between LI1 and +24V terminals.  A maintained dry contact or a jumper can act as a run command. 
    Low speed can be used to control the drive locally. 
    The low speed parameter can be programmed by hitting down arrow key on the drive until LSP is shown. 
    Once LSP shows up press data and use the up and down arrow keys to adjust setting.  Once satisfied with speed press enter to save the setting. 

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance