Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Is it possible to add 255 as the "Remote ID" for PM5340 as a Remote Device Connection in EGX300

    - For  EGX300 firwmare 4.37 and lower, it is not possible to monitor PM5340 over Modbus TCP/IP using "Remote Device Connections" function.
    - PM5340 is a meter with Ethernet communications only. It's device ID is set to 255.
    - If 255 is added as the "Remote ID" under "Device List", the "Remote ID" will be blank after clicking "Apply"

    Product Line:

    EGX300 web page- Remote Device Connections

    The EGX300 firmware 4.370 and lower does not support remote ID of 255.

    - Remote Device Connection monitoring of PM5340 (Remote ID:255) using an EGX300 is not supported by the current EGX300 firmware (v4.37). The next firmware release will support "Remote ID" of 255.  For the latest version of firmware for the EGX300 please see FA242399.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance