Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Where is the 0-10vdc signal landed on the ATV32, ATV312, ATV61 and ATV71 drives?

    Issue:
    Where is the 0-10vdc signal landed on the ATV32, ATV312, ATV61 and ATV71 drives?

    Product Line
    ATV61,  ATV71,  ATV31,  ATV312,  ATV32

    Environment:
    All serial numbers Open style VFDs

    Cause:
    Needs to wire in a  0-10vdc signal for speed control.

    Resolution:
    On the ATV32, ATV61 and ATV71 drives, you can wire the 0 to 10vdc signal to AI1+ to com as reference speed 1, and you can program AI2 in menu the IO menu to set up AI2 as a 0 to 10vdc speed reference 2.
    Please note that there is a factory installed jumper between AI- and com that allows this input to work with a 0 to10vdc input.  If you remove the jumper, then it becomes an -10vdc to +10vdc input.

    On the ATV312, the 0-10vdc signal is landed on AI1 only.


     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance