Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    On an ATV61/71, how can the HMI be used for control and also have a preset speed via logic input LI3?

    How can a logic input preset speed be setup on the ATV61 and ATV71 while using the HMI for control and speed?

    Product Line:
    Altivar ATV61 and ATV71


    Needs to take the drive out of local mode and turn on preset speed for 60Hz.

    Keep the VFD in Remote mode, not Local mode. 
    Program Command menu parameters: Ref 1 channel = HMI and Profile = Not Separ
    This gives RUN/STOP and speed control to the HMI.
    Program Application Funct menu parameters: 2 preset speeds = LI3 (or other desired logic input) and Preset speed 2 = 60 (or other desired value).
    When LI3 goes high, the speed reference will switch to 60Hz.  The HMI is still controlling RUN/STOP.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance