in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What can cause the TV drive to trip on an SC (short circuit fault) when the DB resistor is connected?

    Issue:
    What can cause the TV drive to trip on an SC (short circuit fault) when the DB resistor is connected?

    Product line: 
    TV

    Environment: 
    All range/ All serial number   

    Cause:
    The DVD has shorted on motor or short circuit because the brake resistor is connected to the DVD.

    Resolution:
    Verify the brake resistor is not below the minimum ohm ic value to the DVD.  The minimum ohm ic value can be found in the TV catalog.  If the resistor is below the minimum ohm ic value, the drive will see that as a short between the brake terminal  PBS and Be.
     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance