Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How do you save/open a program on the ATV32 with the hmi keypad?

    Issue:
    How do you save/open a program on the ATV32 with the VW3A1101 Graphic Keypad?

    Product Line:
    ATV32

    Environment:
    All of the ATV32

    Cause:
    Copying the current program into the remote Graphic (HMI) keypad

    Resolution:
    To Save:
    From the Main Menu 
    Scroll down (Clockwise) to the Open/Save As.
    Press Enter (push in on the knob) and then scroll down to Save As.
    Press Enter.
    The display will show 4 files and will indicate which ones are Used or Free.
    Choose the file you want to use to store the current configuration and press enter.
    NOTE; if this file was previously used, the old configuration will be replaced by the new one.
    The keypad will show transfer in progress and will display DONE when complete.

    To Open:
    From the Main menu 
    Scroll down (Clockwise) to the Open/Save As.
    Press Enter (push in on the knob) and select Open
    Press Enter.
    The display will show 4 files and will indicate which ones are Used or Free.

    NOTE; Completing these steps will replace the program currently stored in the drive with the version stored in the keypad.
    Choose the file that contains the file you want to transfer to the drive and press enter.
    You can then select which Download Group you wish to download.
    Choices are All, Drive Configuration, Motor Parameters, and Communication (see the ATV32 Programming manual for details on what parameters are contained in each group).
    Press Enter on the Download Group and you'll be asked to confirm that the drive wiring is OK.  You should verify that the drive and it's associated machinery is in a safe mode and will not start when the new parameters are downloaded.  It is recommended to be sure none of the logic inputs are turned on (have 24VDC applied to them).
    Once you are certain all is ready to proceed, press Enter to continue.
    The keypad will show transfer in progress and will display DONE when complete.

    Refer to the ATV32 programming manual for additional details.
     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance