Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What are the part numbers for push button and rotary dimmers in the Saturn range?

    The part number is for the push button light dimmer is 4061E2PUDM.
    Some of its key features are:
    • Integral switch
    • Push button mechanism
    • Mounting center: 84 mm
    • 0 to 45 deg C
    • Preset minimum brightness
    • Memory dimmer function
    • Wall or architrave mounting options
    • Wide range of plate styles and colours available
    • Suitable for new or retrofit applications
    • Inbuilt over-current and over-temperature protection
    • Full short-circuit protection
    • Built-in suppressors to minimise radio frequency interference
    • Complies with Australian and international EMC standards
    For further information please visit http://www.clipsal.com/Trade/Products/ProductDetail?catno=4061E2PUDM
     
    __________________________________________________________________________________

    The part number for the light modular universal rotary dimmer is 4061E2RUDM.
    Some of the key features are:
    • Integral switch
    • Push button mechanism
    • Mounting center: 84 mm
    • 0 to 45 deg C
    • Preset minimum brightness
    • Wall or architrave mounting options
    • Wide range of plate styles and colours available
    • Suitable for new or retrofit applications
    • Inbuilt over-current and over-temperature protection
    • Full short-circuit protection
    • Built-in suppressors to minimise radio frequency interference
    • Complies with Australian and international EMC standards
    For further information please visit http://www.clipsal.com/Trade/Products/ProductDetail?catno=4061E2RUDM
    __________________________________________________________________________________

    The part number for the 450W universal dimmer is 4062E450UDM.
    Some of itskey features are:
    • Rotary modular dimmer
    • Push button
    • Saturn series gridplate
    • 0 to 40 deg C
    • Mounting center: 84 mm
    • Separately switched compact modular dimming mechanism
    • Soft start operation
    • Preset minimum brightness
    • Wall or architrave mounting options
    • Wide range of plate styles and colour variants available
    • Suitable for one-way or two-way operation
    • Suitable for new installations or retro-fit applications
    • Inbuilt over-current and over-temperature protection
    • Short circuit protection
    • Fitted with suppressors to minimise radio frequency interference
    • Complies with Australian and International EMC Standard
    For further information please visit http://www.clipsal.com/Trade/Products/ProductDetail?catno=4062E450UDM
     

    __________________________________________________________________________________

    The part number for the Saturn LED dimmer 4062ELEDM.
    Some of its key features are:
    • Optimised dimming range for smooth control of dimmable LED loads, no configuration required
    • Short circuit and thermal overload protection
    • Suitable for 1-way or 2-way switching applications
    For further information please visit http://www.clipsal.com/Trade/Products/ProductDetail?catno=4062ELEDM
     

     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance