Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How can you program the R1 or R2 relays on the ATV31 or ATV312 drives?

    Issue:
    How can you program the R1 or R2 relays on the ATV31 or ATV312 drives?

    Product Line:
    ATV31 or ATV312

    Environment:
    All

    Cause:
    Setting up R1 and R2 relays on the ATV31 or ATV312 drives?

    Resolution:
    Note: "press Enter" means press in on the dial, and "scroll down" means turn the dial clockwise. 

    1. While at RDY on the drive's display, press Enter 
    2. Scroll down to I/O menu and press Enter
    3. Scroll down to R1, press enter, and choose your desired setting. Example: FLT is drive fault.
    4. Scroll down to R2 enter and choose your desired setting. Example: RUN is drive running.

    For further detail, please refer to page 50 in the ATV312 Programming Manual.
    https://www.schneider-electric.com/en/download/document/BBV46385/

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance