Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    XW sell setup checklist w/MPPT 60/80.


    Checklist for setting up an XW system for sell. See XW operation manual for full full details.

    XW 4024 or XW 4548 or XW 6048 with f/w revisions 1.05 and above. MPPT60 or 80 charge controller. SCP 


    1) Enable Grid support in XW setup menu
    2) Set Grid support voltage to 64V and enable SELL in XW advanced - grid support menu
    3) Verify CHARGE CYCLE is '2stgnofloat' in XW advanced - charger settings - charge cycle (factory default setting)
    4) On MPPT set CHARGE CYCLE to '3 stage' in MPPT advanced - charger settings - charge cycle 
    5) Is also recomended that the system has 100Ah for every KW of power that the customer wants to sell



    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance