in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    XW MPPT60-150 shows lowlight condition but PV input is higher than battery voltage.


    XW MPPT60-150 Shows low light
     
    NOTE:  The PV input must be greater then Battery voltage by the following factor

    Battery voltage plus a factor of 0.25 V per 12 V. For example, in a 24 V system, if the battery voltage
    is 27.0 V and the PV array is producing 27.4 V, the Low Light message appears. The Low Light
    message clears when the input voltage rises above the battery voltage plus a factor of 1 V per 12 V.
    THIS IS NOT MEANT TO IMPLY THE ARRAY CAN BE CONFIGURED TO THE SAME VOLTAGE AS THE BATTERY. ALWAYS HIGHER.























     



     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance