Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Why is my SW Plus 5548 Faulting with over current condition when it starts a Bulk Charge?

    Over Current Condition on the Trace SW and SW Plus Series 

    The over current condition on the Trace SW and SW Plus is commonly caused by having too much AC load, or a short circuit condition on the SW output.

    If output wires are removed by a qualified person, and the overcurrent condition cannot be cleared, remove AC and DC for 20 minutes.
    If the overcurrent condition does not clear, the SW will need be repaired or replaced.

    Call into Technical Support for the Authorized Service Center near you.
    866-519-1470

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance