in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Dynamic periodic monitoring of dual body valves on an XPSPVK eccentric press

    Presses used for cold working of metals must be systematically and regularly checked.
    This check also affects the safety function provided by the XPSVK Preventa module: faults must to be simulated in order to test this function.
    Method used to check the dynamic monitoring of the dual body valve when this is performed by an XPSPVK module
    Caution: These tests must be carried out by suitably trained personnel.
    Since the Preventa module only monitors the closing of the 2 disks of the dual body valve, the XPSPVK product cannot be tested by disconnecting only one of the valve's two coils then resetting.
    Tests to be performed during periodic checks
    1/ Equipment required for these tests:
    • Flat blade screwdriver
    •  Piece of insulated electrical cable, min. length 6 cm (internal voltage 24 VDC)

    2/ Simulation of a detector connection fault

    OR stop at the upper threshold in single stroke mode

    Result: the stroke does not start if the command is activated (open output 21-22).

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance