Discover our Clipsal Smart Home packages as seen on the Block

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Simulation of a fault on one of the 2 valve flaps (dynamic monitoring) managed by an XPSPVK

    The presses used for the cold working of metals must be routinely and regularly checked.

    This check also affects the safety function provided by the XPSPVK Preventa module: faults must be simulated in order to test this function.
    Method used to check the dynamic monitoring of the dual body valve when this is performed by an XPSPVK module

    Caution: These tests must be carried out by suitably trained personnel.

    Tests to be performed during periodic checks

    1/ Equipment required for these tests
    • Flat blade screwdriver
    • Piece of insulated electrical cable, min. length 6 cm (internal voltage 24 VDC)
    2/ Press in single stroke mode, stop at upper threshold: control the start of the stroke using the two-hand control device

    3/ Prior to the slide stopping at the upper threshold, simulate the closing fault of one of the 2 valve disks

    Remove the strap after the slide has stopped at the upper threshold

    Result: During positioning of the strap, the hold function for raising the slide is stopped (open output 13-14) and control of the next cycle must be inhibited via open output 21-22. In order to start a new cycle, the reset button (between terminals 7 and 8) must be operated.


    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance