Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Why is my Modbus Plus Peer Cop communication to an STBNMP2212 Advantys STB island not working ?


    MB+ Peer cop communication not working with an Advantys STBNMP2212


    Not able to read and write data to an Advantys STBNMP2212 via peer cop

    Product Line

    Advantys STB


    Advantys STB connected to a MB+ network




    The most common reasons are as follows:

    1.  The Peer Cop configuration has to be setup as Global Inputs and Specific Outputs.

    2.  The master device has to be identified in the configuration file of the Advantys Modbus Plus NIM (network interface module) and downloaded to the NIM.  Using the Advantys configuration software, double click on the NIM, which will give you access to the Parameters list.  The Fieldbus Handler Control Word indicates the Modbus Plus address of the master device.  The default is 0, which corresponds to a Modbus Plus address of 1 for the master device(offset of -1).  This is the only master device that will be able to write to any output words of the STBNMP2212.  All Modbus Plus devices will be able to read any input words of the NIM.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance