Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What would cause the Twido Real Time Clock (RTC) to have the time drift?

    The Twido when configuring a Real Time Clock (RTC) it requires the user to go on line to the Twido and go to the Check PLC tab to Configure the RTC. There is a Correction Factor that has to be entered in the software. This is either located on the RTC chip for the low end Twido controllers or next to the 40DRF controllers mini din port on the unit. Once the correction factor is entered and applied at this point the RTC adjustment can now be set and synchronized.

    Note: The Twido product line is obsolete and has been replaced with the M221 and SoMachine Basic.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance