in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Where is the 0-10vdc analog input speed reference wired on the ATV71 / ATV61 drives?

    Issue: 
    Where is the 0-10vdc analog input speed reference wired on the ATV71 / ATV61 drives?

    Product Line:
    ATV71  ATV61 

    Environment
    All
     
    Cause:
    Wiring 0-10vdc input

    Resolution:
    Typically, 0-10vdc analog input reference is connected between AI1 (+) and com. ( please note there is a jumper between AI1- and com, so leave this jumper in place)
    Programming menu 1.5, AI1 configuration, choose 0 min  and 10vdc max.
    AI2 can be configured for a voltage reference in the I/O menu (1.5).  Under AI2 configuration, select assignment " voltage type" , minimum and maximum values 0 to 10vdc..

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance