Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Video: Data Center Expert | How do I mass upgrade APC and NetBotz appliance firmware?

    Issue:
    Process for mass upgrading firmware on APC NMCs and NetBotz appliances using StruxureWare Data Center Expert.

    Product Line:
    StruxureWare Data Center Expert (DCE)
    - Basic Appliance (AP9465)
    - Standard Appliance (AP9470)
    - Enterprise Appliance (AP9475)
    - Virtual Appliance (AP94VMACT)
    StruxureWare Central (SWC)
    InfraStruXure Central (ISXC)

    Environment:
    ISXC, SWC, & DCE (all versions)
    APC Network Management Card (NMC)
    NetBotz (NB)

    Resolution:


    1) Open the DCE desktop client and navigate to: Updates menu > Apply Firmware Updates.

    2) Select Check Updates to pull in the most recent firmware updates from updates.apc.com.
    NOTE: The firmware catalog file may need to be manually added if the DCE server is on a restricted network.  See knowledge base FA226042 for instructions.
    NOTE: To see what information needs to be allowed through your network security to pull in the updates see knowledge base FA293307.

    3) Check the boxes for the upgrades that you wish to perform.  You can select the root firmware trees or you can navigate down and check only a specific device.
    NOTE: When checking a device, ensure to look at the Update Description field to see what was updated on the firmware.
    NOTE: Ensure that within the Device File Transfer Settings that the administrator credentials of the devices are listed with the correct protocol, port, and IP Range settings.

    4) Select Apply to start the firmware upgrade process.

    5) A firmware update status pane will show and will provide different status messages depending on the phase of the upgrade currently being performed.

    NOTE: It is not possible to apply an older firmware version for the purpose of downgrading an NMC.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance