Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What are the input circuit requirements for an EV Charging Station?

    Issue:
    What are the feeder circuit requirements for an EV Charging station?

    Product Line:
    PTEVC - ELECTRICAL VEHICLE

    Environment:
    Electrical vehicle charging stations

    Cause:
    Information needed for installation

    Resolution:
    The EVlink series of Level 2 charging station require a 40A, non-GFI type breaker for each charging outlet.  #8 wire is required (L1, L2, and GND).  For dual outlet charging stations, two 40A non-GFI breakers will be required (one for each charging outlet).  A neutral connection is not required for EVlink stations.
    A 40A circuit breaker is required as the continuous output current from the charging station can be as high as 30A. 
    The wiring dagram for a single outlet charging station is shown in the figure below.
    EVlink Basic Wiring Diagram
    Click the link for more information on EVlink Electric Vehicle Products

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance