Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How do I enable/disable SCP audible alarm when a fault occurs?

    In order to enable/disable the audible alarm on the XW inverter/charger and the Conext SW Inverter/charger, you have to navigate through the system control panel.

    From the System Status Screen
    1.)  Press Enter
    2.)  Under Select Device select the SCP
    3.)  Scroll down until you see Fault Alarm
    4.)  Press enter to enable/disable

    *NOTE:  Below the fault alarm option there is an additional low battery alarm that you would need to enable separately from the fault alarm option

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance