Discover our Clipsal Smart Home packages as seen on the Block

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Video: How do you configure the ATV71 drive to allow the F4 function key to be terminal keypad mode?

    How do you configure the ATV71 drive to allow the F4 function key to be terminal keypad mode?

    Product Line:
    ATV61 and ATV71

    All serial numbers

    Need to control drive locally

    For the ATV61, the keypad F4 key is assigned to T/K as factory default. Verify by looking in the keypad display, just above the F4 key. Press F4 to toggle between Local and Remote modes. The active mode is in the display upper right corner: LOC or REM.
    If the F4 key is not assigned to T/K, then follow the procedure for an ATV71, below. 

    For the ATV71, the keypad F4 key needs to be assigned to T/K.
    Under the MAIN MENU, select DRIVE MENU and then 1.6 COMMAND.
    Scroll down and select F4 Key Assignment and set it to T/K.
    Now pressing the F4 key will toggle between Local and Remote modes.  The active mode can be verified in 1.2 MONITORING.
    You will also notice either ('HMI' and 'LOC') or ('Term' and  'REM') in the Parameter Bar at the top of the keypad display.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance