Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How do you set up and route through SY/MAX NIM modules to a SY/MAX PLC using 8010 SFW572 WINMATE Software?

    The first 3-digit number represents the source. The source is the connection point between the personal computer

    and the Network. The last 3-digit number represents the destination. The destination is the connection point between
    the SY/MAX processor and the Network. The first digit of the 3-digit number indicates the port on the NIM
    (Network Interface Module) to which the computer or processor is connected. The first digit can be a 1 or 0, indicating
    one of two ports on the NIM.
    Example

    Shown below is a simple routing path from a PC through 2 NIM modules


    Note: The Sy/Max product line is obsolete and the recommended replacement or this would be the M580 product family with Unity Pro, for more information on this contact you local distributor or Schneider sales office.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance