Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How do you set up and route through SY/MAX NIM modules to a SY/MAX PLC using 8010 SFW572 WINMATE Software?

    Goals and Symptoms

    The first 3-digit number represents the source. The source is the connection point between the personal computer

                  • and the Network. The last 3-digit number represents the destination. The destination is the connection point between
                    the SY/MAX processor and the Network. The first digit of the 3-digit number indicates the port on the NIM
                    (Network Interface Module) to which the computer or processor is connected. The first digit can be a 1 or 0, indicating
                    one of two ports on the NIM.
    Causes and Fixes

    Shown below is a simple routing path from a PC through 2 NIM modules



    Note: The Symax product line was made obsolete it 2015 and it is recommended to upgrade to the M580 and the x80 I/O.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance