Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Video: How to convert a settings file for a MiCOM relay

    Issue
    The setting file for a MiCOM relay needs to be configured to be compatible with the new MiCOM relay.

    Product line
    Easergy Studio
    MiCOM Px2x, Px3x, Px4x

    Environment
    Easergy Studio

    Cause
    When a new MiCOM is installed, the old settings file is often not compatible with the new MiCOM relay.

    Resolution
    Below are the steps on how to convert a MiCOM setting file and a video demonstrating the process.



    1. Open MiCOM S1 Studio
    2. Open your existing system, or if no system is created, create one using the relay model number that you have.
    3. Give the system a name and a save path, then click ok.
    4. Right-click on system and choose new device.
    5. Select the series of the device to drill down to the exact model number.
    6. Choose the model type that you have and then click next.
    7. Choose the model number and then click next.
    8. Specify the protocol for the MiCOM.
    9. Enter a device name and comment if desired. Then click Finish.
    10. Right-click on settings then select Add Existing File. Locate the file and open it.
    11. The file will be displayed as a subsection beneath settings. Right-click on this settings file and select Convert Settings File.
    12. Select the new model relay and then click Finish. Select the location to save the converted settings file and then click save.
    13. After converting you may see a message with warnings about potential feature incompatibilities. You can Close this message to proceed.
    14. The next message asks you to compare settings files to see differences. Click OK to continue.
    15. The new file will not open automatically. You must add a new device to match the converted settings file and then add the file we created. This can be done exactly as we did with the original device.
    16. The new file will now be shown and may be edited as necessary.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance