Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How do I scale or do a math calculation on a numeric display and also allow input using Vijeo Designer?

    In Vijeo Designer, by default, if you do any math calculations in the variable field it will deactivate the "Enable Input Mode".
    The solution would be:

    1) Create a numeric display with input mode enabled. Let s call this NumericDisplay01. Assign it to INT01 for example.

    2) Create another numeric display (NumericDisplay02) but with input mode disabled. For this one you would enter the expression (e.g. INT01*2) in the Variable field.

    3) Overlay NumericDisplay02 on NumericDisplay01.

    In Runtime, touch input will automatically go to NumericDisplay01 since it is disabled for NumericDisplay02.


    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance