Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Video: How to create and save a Data Watch Window in the ProWORX 32 v2.1 programming software.

    Goals and Symptoms

    To create and save a Data Watch Window in the ProWORX 32 v2.1 programming software.

    Causes and Fixes

    The following video demonstrates how to create, then save a Data Watch Window for registers 40030 through 40035. A written procedure is available below the video.



    There are two ways to open a Data Watch Window. You can either.....
    1- Go to the main toolbar and select PROJECT then DATA WATCH WINDOW.
    or
    2- From the Navigation window, open DATA EDITORS and select DATA WATCH WINDOW.



    Once the Data Watch Window has been opened, follow this procedure for filling the Data Watch Window with addresses:
    1- Right-click in the Data Watch Window, and click Fill Addresses. The Add Addresses dialog box opens.
    2- Enter address 40030 in the Starting Address field. This is the first in a range of addresses to be added to the Data Watch Window.
    3- Enter numeric value 6 in the Number of Addresses field. This is the length of the range of addresses (40030 to 40035) to be added to the
    Data Watch Window.
    4- Click OK. Addresses specified are added at the current grid location. Existing addresses may be overwritten.



    To save the Data Watch Window template, right-click in the Data Watch Window, and click Save Address Template.
    A Datawatch Log File (*DWA) will be created with the project name and placed into the folder you choose.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance