in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Is it possible to connect to an M340 PLC with an embedded Ethernet port via a default IP address?

    Yes the default IP address of an M340 PLC can be determined by converting the last 3 octets in the MAC address, setting the rotary switch to Clear IP and preceding the IP address with 84.
    Note: In order to write a new IP address to the M340 after the configuration is saved to flash the rotary switch needs to go back to stored.

    Example: If the MAC address is 00.80.F4.02.EA.6A then the IP address will be 84.2.234.106

    02 Hex = 02 Decimal
    EA Hex = 234 Decimal
    6A Hex = 106 Decimal


    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance