Discover our Clipsal Smart Home packages as seen on the Block

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How to Connect to a MB+ network with PW NXT on a remote PC using a MBX Gateway?

    Connecting Using the MBX Gateway Driver

    Facts and Changes

    MBX Driver Suite v6.0, PW NXT

    Causes and Fixes

    Note: For information on how to setup the MBX Gateway Client and Server see the resolution entitled "How to connect remotely to a MB+ network via TCP/IP using the MBX Gateway driver".
    To Connect to a MB+ Network with PW NXT from a remote PC via the MBX Gateway you must chose the Adapter/Device number of the MBX Gateway Client in the Communication Setup.
    First under the Controller menu chose Communication Setup.

    Next under Modbus Plus chose the Adapter number of the MBX Gateway Client and hit OK.

    Now just select the MB+ address of the PLC you wish to connect to under Select Device and connect.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance