Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How to Connect to a MB+ network with PW32 on a remote PC using a MBX Gateway?

    Connecting Using the MBX Gateway Driver

    Facts and Changes

    MBX Driver Suite v6.0

    Causes and Fixes

    Note: For information on how to setup the MBX Gateway Client and Server see the resolution entitled "How to connect remotely to a MB+ network via TCP/IP using the MBX Gateway driver".
    To Connect to a MB+ Network with PW32 from a remote PC via the MBX Gateway you must chose the Adapter/Device number of the MBX Gateway Client in the Communication Setup.
    First in the Project tree double click on Communications.



    Under the Modbus Plus tab type in the Adapter number of the MBX Gateway Client and the MB+ address of the PLC you wish to connect to. Hit OK and go Online to the PLC.


    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance