Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How to Monitor a MB+ network with MBPstat on a remote PC using a MBX Gateway?

    Goals and Symptoms

    Connecting Using the MBX Gateway Driver

    Facts and Changes

    MBX Driver Suite v6.0

    Causes and Fixes

    Note: For information on how to setup the MBX Gateway Client and Server see the resolution entitled "How to connect remotely to a MB+ network via TCP/IP using the MBX Gateway driver".
    In order to Monitor the MB+ Network with MBPstat from a remote PC via the MBX Gateway you must chose the Adapter/Device number of the MBX Gateway Client.
    To do this first run MBPstat.

    Next type in the Adapter/Device number of the MBX Gateway Client (in this case 1) and hit enter.
    Note: This is set during the MBX Gateway Client configuration.

    If there is a successful connection to the MBX Gateway Server then the MB+ node address of the Server PC will be identified.
    Next for the Routing path chose 0 and hit enter.

    Now select option 2 Monitor Network Activity to display the MB+ network connected to the MBX Gateway Sever PC.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance